BFT DEIMOS 400 vs DEIMOS 600 – Which Gate Motor Should You Choose?

The BFT DEIMOS BT A400 and BFT DEIMOS BT A600 are 24 V automatic sliding gate operators designed for residential and suitable commercial gate automation applications. Both belong to the BFT DEIMOS range, but they are designed for different maximum gate weights.

The main difference is straightforward: the DEIMOS BT A400 is designed for sliding gates weighing up to 400 kg, while the DEIMOS BT A600 supports sliding gates weighing up to 600 kg.

Motor capacity should not be the only consideration, however. Gate length, mechanical condition, track resistance and expected daily usage should also be considered before choosing an automatic sliding gate motor.

BFT DEIMOS 400 vs 600 Comparison

BFT DEIMOS BT A400

The BFT DEIMOS BT A400 is a 24 V sliding gate operator designed for gates weighing up to 400 kg. It provides a gate-panel speed of 12 metres per minute and is specified for intensive use.

The A400 uses a HAMAL control unit, electromechanical limit switch, mechanical locking and BFT D-Track impact-reaction technology. Slowdown functionality is also supported.

When Should You Consider the DEIMOS 400?

The DEIMOS BT A400 can be considered when:

• The sliding gate weighs no more than 400 kg
• A 24 V BFT sliding gate operator is required
• The gate moves smoothly and is mechanically sound
• The application requires an intensive-use rated operator
• A compact BFT solution is required for a residential or suitable light-commercial entrance

View BFT DEIMOS BT A400 →

BFT DEIMOS BT A600

The BFT DEIMOS BT A600 increases the maximum supported gate weight to 600 kg while retaining several important characteristics of the A400.

It uses a 24 V motor, has a specified gate speed of 12 metres per minute, uses an electromechanical limit switch and is rated for intensive use. Its listed power consumption is 70 W compared with 50 W for the A400.

When Should You Consider the DEIMOS 600?

The DEIMOS BT A600 can be considered when:

• The gate requires capacity above the A400's 400 kg maximum
• The sliding gate weighs no more than 600 kg
• A 24 V BFT sliding gate operator is required
• The entrance requires an intensive-use rated operator
• Additional gate-weight capacity is appropriate for the installation

View BFT DEIMOS BT A600 →

What Is the Main Difference Between DEIMOS 400 and 600?

The most important difference is maximum supported gate weight.

The DEIMOS BT A400 supports sliding gates up to 400 kg, while the DEIMOS BT A600 supports gates up to 600 kg.

They otherwise share several important specifications, including:

• 24 V motor
• 12 m/min gate-panel speed
• Intensive-use rating
• HAMAL control unit
• Electromechanical limit switch
• D-Track impact reaction
• Mechanical locking
• Slowdown functionality
• IP24 protection rating

Should I Buy the DEIMOS 600 Instead of the 400 for Extra Power?

Not automatically.

A larger capacity number does not mean the larger motor is always the better choice. The objective should be to select an operator appropriately matched to the gate and installation.

If a well-maintained sliding gate is comfortably within the A400's operating capacity, the A400 may be appropriate. If the gate exceeds that capacity or the installation requires the higher rated gate-weight range, the A600 should be considered.

Gate condition is particularly important. A poorly aligned sliding gate can create excessive resistance regardless of its measured weight.

Gate Weight Is Not the Only Factor

Before selecting either DEIMOS model, check:

• Actual gate weight
• Overall gate length
• Track alignment
• Condition of gate wheels and rollers
• Resistance when moving the gate manually
• Daily operating frequency
• Installation environment
• Required safety accessories

A gate should move smoothly by hand before automation. An automatic motor should not be used to compensate for damaged wheels, poor alignment or excessive mechanical resistance.

What If My Sliding Gate Is Heavier Than 600 KG?

If the gate exceeds 600 kg, selecting the DEIMOS A600 simply because it is the larger of these two models would not be appropriate.

BFT provides higher-capacity sliding gate automation for heavier entrances. Depending on the application, models from the BFT ARES or BFT ICARO families may be more appropriate.

Examples available in the BFT sliding gate range include:

• BFT ARES BT A1000
• BFT ARES BT A1500
• BFT ICARO SMART AC 2000

For the complete range, visit BFT Sliding Gate Motors in UAE →

DEIMOS BT vs DEIMOS AC

It is also important not to confuse the DEIMOS BT A400/A600 models with BFT DEIMOS AC operators.

The DEIMOS BT A400 and A600 discussed in this guide use 24 V motors. BFT also offers DEIMOS AC models using 230 V motors with different technical specifications and operating characteristics.

Therefore, a product described simply as “DEIMOS 600” should be checked carefully to confirm whether it is the BT or AC version before comparing specifications, control boards or accessories.

Safety and Control Accessories

A complete automatic sliding gate installation may require additional safety and control components depending on the application.

These can include:

• Photocell safety sensors
• BFT remote controls
• Flashing warning light
• Push button
• Control board
• Radio receiver
• Access-control equipment
• GSM gate access

Compatibility should always be checked against the exact operator and control system rather than assuming that every BFT accessory works with every BFT motor.

BFT Remote Controls   |   BFT Control Boards   |   BFT Parts & Accessories

DEIMOS 400 vs 600: Which One Should You Choose?

Frequently Asked Questions

What is the maximum gate weight for BFT DEIMOS 400?
The BFT DEIMOS BT A400 is designed for sliding gates weighing up to 400 kg.

What is the maximum gate weight for BFT DEIMOS 600?
The BFT DEIMOS BT A600 is designed for sliding gates weighing up to 600 kg.

Are DEIMOS 400 and 600 both 24 V?
Yes. The DEIMOS BT A400 and DEIMOS BT A600 compared in this guide both use 24 V motors.

Are the DEIMOS 400 and 600 the same speed?
Yes. Both models have a specified gate-panel speed of 12 m/min.

Which consumes more power?
The listed power consumption is 50 W for the DEIMOS BT A400 and 70 W for the DEIMOS BT A600.

Are both models suitable for intensive use?
Yes. Both the DEIMOS BT A400 and A600 are specified for intensive use.

Should I choose DEIMOS 600 for a 400 kg gate?
Not simply because it has a higher maximum capacity. The appropriate motor should be selected according to the actual gate weight, dimensions, mechanical condition and operating requirements.

What BFT motor should I consider if my gate weighs more than 600 kg?
A higher-capacity BFT sliding gate operator should be considered. Depending on the gate and application, this may include models from the BFT ARES or ICARO ranges.

Learn More About Choosing a BFT Gate Motor

If you are still deciding between different BFT motor families, read our complete How to Choose the Right BFT Gate Motor in UAE guide. It covers sliding and swing gates, motor capacity, usage requirements, voltage and other important selection factors.