BFT PHOBOS BT B40 700 KG Swing Gate Motor UAE
BFT PHOBOS BT B40 Product Introduction
The BFT PHOBOS BT B40 700 KG Swing Gate Motor is a 24V electromechanical operator for automating large swing gate leaves at villas, residential compounds, commercial properties and parking entrances. With a maximum specified leaf weight of 700 KG and a maximum leaf length of 4 metres with an appropriate electric lock, it provides a practical solution for entrances that require controlled automatic opening and closing. Each operator drives one gate leaf; a double-leaf entrance requires a correctly configured two-operator system.
The B40 combines a 40W low-voltage motor with BFT D-Track force management, magnetic limit switches and opening and closing slowdown. Its 470 mm useful rod stroke supports the mounting geometry required for larger swing gates. The specified maximum opening angle is 130°, while the approximate movement time for a 90° opening is 16 seconds. These figures depend on the installation geometry and control settings.
With 2000N thrust and traction force, a specified maximum of 30 cycles per hour and a 5.2 KG operator weight, the B40 suits demanding gate installations that need the higher stated load capacity of this PHOBOS model.
The gate must be assessed before selecting an operator. Maximum leaf length and maximum leaf weight are separate limits and should not be assumed to apply together. Gate construction, hinge condition, mounting position, wind exposure and the gate length-to-weight relationship all affect suitability. For leaves over 3 metres, an electric lock is required according to the gate configuration and installation requirements.
BFT PHOBOS BT B40 Key Features
- 24V electromechanical swing gate operator with 40W power consumption
- Maximum specified leaf weight: 700 KG
- Gate leaves up to 4 m with an electric lock; up to 3 m without an electric lock
- BFT D-Track force management for controlled operating force
- Magnetic limit switches for adjustment of opening and closing positions
- 470 mm useful rod stroke
- Maximum opening angle up to 130°
- Approximate 90° movement time: 16 seconds
- Opening and closing slowdown functionality
- Mechanical locking system
- Personal-key manual release
- IP44 protection rating
- Operating temperature range from -20°C to +55°C
- 2000N thrust and traction force
- Maximum specified frequency: 30 cycles per hour
BFT PHOBOS BT B40 Technical Specifications
- Brand: BFT
- Model: PHOBOS BT B40
- Product Code: P935130 00002
- Part Number: 2614566
- Operator Type: Electromechanical swing gate operator
- Motor Voltage: 24V
- Board Power Supply: 230V
- Compatible Control Units: THALIA BT A80 / ZARA BT A80
- Power Consumption: 40W
- Maximum Gate Leaf Length: 4 m with a suitable electric lock
- Maximum Length Without Electric Lock: 3 m
- Maximum Specified Leaf Weight: 700 KG
- Useful Rod Stroke: 470 mm
- Thrust and Traction Force: 2000N
- Maximum Opening Angle: 130°
- Movement Time at 90°: Approximately 16 seconds
- Maximum Cycles: 30 cycles per hour
- Limit Switch: Magnetic
- Slowdown Function: Yes
- Locking System: Mechanical
- Manual Release: Personal key
- Impact Reaction: D-Track
- Protection Rating: IP44
- Operating Temperature: -20°C to +55°C
- Operator Weight: 5.2 KG
24V Drive and Control Board Compatibility
The operator motor runs at 24V, while the listed control-board power supply is 230V. These are different parts of the automation system: the operator should be connected through the correct BFT control unit rather than directly to a mains supply. Compatible control units include THALIA BT A80 and ZARA BT A80 control units. Confirm the exact board version, wiring requirements and accessory connections when planning a new installation or replacing an existing operator.
D-Track Force Management and Slowdown
BFT D-Track manages the operating force during gate movement. The magnetic limit switches identify the adjusted travel positions, while slowdown allows the gate to reduce speed near the opening and closing limits. Together, these features support controlled movement when the gate and control board are correctly installed and programmed. Safety photocells and any other required protective devices must be selected and tested as part of the complete installation.
Magnetic Limits, Locking and Manual Release
Magnetic limit switches allow the installer to set the travel positions to suit the gate geometry. The operator also has a mechanical locking system and a personal-key manual release. During a power interruption or when manual access is needed, the release enables the operator to be disengaged in accordance with the operating instructions. Keep the release key accessible to authorised users and confirm the release procedure during commissioning.
Suitable Applications
- Villa driveway swing gates
- Large residential entrance gates
- Single-leaf and double-leaf swing gate installations
- Residential compounds and private estates
- Commercial premises and office entrances
- Community entrances and parking access gates
Accessories and System Configuration
A complete gate automation system may use the following accessories. Compatibility depends on the selected control board and installation configuration; confirm the exact supplied items before ordering.
- Compatible BFT 24V swing gate control board
- BFT Mitto remote controls
- BFT photocell safety sensors
- BFT flashing warning light
- Electric gate lock for the applicable gate length and configuration
- Push-button controls
- GSM gate opener with a compatible control interface
- WiFi smart gate controller with a compatible control interface
- RFID and other access control systems
Package Contents
Request the exact package contents with your quotation. Please confirm whether the quotation covers one operator or a complete double-leaf kit, and whether the control board, remotes, photocells, warning light, brackets and electric lock are included. The accessories listed above should not be assumed to be supplied as standard.
Installation and Support in UAE
Correct installation includes checking gate alignment and free movement, selecting the mounting geometry, securing the brackets, setting the magnetic limits and programming the compatible control board. The installer should then check opening and closing slowdown, force settings, safety photocells and manual release before handing over the system. Existing hinges or gate structures that bind should be corrected before motor commissioning.
Contact BFT Automation UAE to discuss product supply, installation requirements and technical support in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Installation charges, availability and warranty terms should be confirmed in the quotation for your specific project.
Why Choose BFT PHOBOS BT B40?
BFT PHOBOS BT B40 combines the 700 KG maximum specified leaf rating with a long 470 mm useful stroke, magnetic limit adjustment and D-Track force management. Its 24V motor, slowdown function and manual release make it a useful option for larger swing gate installations where the gate dimensions, weight and mounting geometry fall within the applicable limits. The B40 additionally provides the stated 2000N force and up to 30 cycles per hour.
BFT PHOBOS BT B40 Frequently Asked Questions
What gate weight can the B40 handle?
The maximum specified gate leaf weight is 700 KG. Suitability also depends on leaf length, construction, wind exposure and mounting geometry. Do not assume the maximum weight and maximum 4 m length can be used together.
Can it automate a 4-metre gate leaf?
The maximum listed leaf length is 4 m with an appropriate electric lock. The listed maximum without an electric lock is 3 m. The installation must also satisfy the applicable weight and geometry requirements.
What voltage does the motor use?
The motor operates at 24V. The listed control-board power supply is 230V, and the operator must be wired through a compatible BFT control unit.
How fast does it open the gate?
The listed movement time is approximately 16 seconds for a 90° opening. Actual travel time depends on the gate geometry, programmed slowdown and installation settings.
Can I open the gate manually if power fails?
Yes. The operator has a personal-key manual release. Follow the operator instructions to disengage the mechanism before moving the gate manually.
Which safety and control accessories can be used?
Compatible photocells, a warning light, BFT remotes, an electric lock and access control interfaces can be configured with the appropriate control board. GSM and WiFi operation require a suitable separate controller and compatible interface.
Are the remote controls and photocells included?
Request the exact kit contents before ordering; optional accessories are not automatically included.
What is the difference between PHOBOS BT A40 and B40?
The A40 is specified at up to 500 KG, 400 mm useful stroke, 124° maximum angle and approximately 20 seconds at 90°. B40 is specified at up to 700 KG, 470 mm stroke, 130° maximum angle and approximately 16 seconds at 90°, with 2000N force and up to 30 cycles per hour. Both list a maximum 4 m leaf length with the applicable electric-lock requirement.
Order BFT PHOBOS BT B40 from BFT Automation UAE
Ask BFT Automation UAE for current pricing, stock availability, a suitable kit configuration and installation support. Share your gate leaf dimensions, approximate weight, photos and existing control-board details so the correct operator and accessories can be identified.
Call / WhatsApp: +971 52 5223840
Email: sales@bftautomationuae.com