BFT MITTO COOL C4 Remote Control UAE

BFT MITTO COOL C4 Product Introduction

The BFT MITTO COOL C4 Remote Control is an original BFT 4-channel transmitter for compatible automatic gates, parking barriers and garage door openers. Its 4 programmable buttons let users operate supported automation functions from one compact handheld remote. It is suitable for everyday access at villas, residential compounds, office parking areas and commercial entrances equipped with an appropriate BFT receiver.

Identified by product code D112318 and international code 2614120, the BFT MITTO COOL C4 operates at 433 MHz and uses one 3V CR2032 coin-cell battery. The blue housing weighs approximately 20 g and is convenient to carry for regular gate and garage access. Its nominal operating range is approximately 50–100 metres under suitable conditions.

The C4 uses rolling code technology and offers four separate channels. This makes it useful when a property has several compatible entrances or automation commands. The receiver determines which functions can be assigned to each button, and every required channel must be programmed correctly.

BFT MITTO COOL C4 Key Features

• Original BFT remote control transmitter
• 4-channel / 4-button operation
• 433 MHz operating frequency
• Rolling code technology
• Nominal operating range approximately 50–100 m
• 3V power supply using one CR2032 battery
• Compact blue housing with approximately 20 g weight
• Product code D112318; international code 2614120
• For compatible BFT gate, barrier and garage automation systems

BFT MITTO COOL C4 Technical Specifications

• Brand: BFT
• Model: MITTO COOL C4
• Product Code: D112318
• International Code: 2614120
• Product Type: Remote control transmitter
• Number of Channels: 4
• Number of Buttons: 4
• Frequency: 433 MHz
• Coding: Rolling code
• Operating Range: Approximately 50–100 m
• Power Supply: 3V
• Battery Type: CR2032
• Number of Batteries: 1
• Weight: 20 g
• Colour: Blue
• Interconnectivity: No

Buttons and Everyday Operation

The 4 buttons provide 4 channels for compatible automation commands. A receiver may be configured for a gate, a garage door, a parking barrier or another supported function. For multi-entrance properties, check that each receiver is compatible and that the required buttons have been enrolled before relying on one remote for all entrances.

Receiver Compatibility

Matching the 433 MHz frequency alone does not guarantee compatibility. The receiver must also support the transmitter coding system. Check the model of the existing remote, the radio receiver and the control board before ordering an additional or replacement transmitter.

• Compatible BFT sliding gate motors
• Compatible BFT swing gate motors
• Compatible BFT parking barriers
• Compatible BFT garage door openers
• Compatible BFT radio receiver systems

Wireless Range and Installation Conditions

The stated operating range is approximately 50–100 m. Actual range varies with the receiver antenna position, walls, buildings, metal structures, radio interference and site layout. A weak transmitter battery can also affect everyday operation. Test the remote at the intended access point after programming.

CR2032 Battery Power

The BFT MITTO COOL C4 uses one 3V CR2032 battery. When replacing it, use the specified battery type and follow the transmitter instructions and polarity markings. If operation becomes unreliable, check battery condition along with the receiver antenna and local interference before replacing the remote.

Programming and Replacement

Programming follows the procedure for the installed radio receiver or automation control board. Identify the receiver first, confirm compatibility, then register the required button or channel using its approved learning procedure. Check each programmed command after setup. There is no single programming sequence that applies to every receiver.

For a lost, damaged or non-working remote, provide a clear picture or model number of the original transmitter and details of the receiver. Additional remotes can be enrolled where the system supports them. For shared residential or commercial entrances, programming access may need to be arranged with the property administrator or installer.

Suitable Applications

• Villa automatic gates and residential compounds
• Residential and commercial sliding or swing gates
• Parking barriers at offices and commercial properties
• Compatible garage door automation
• Compatible multi-entrance automation systems
• Warehouse and industrial entrances with a suitable receiver

Package and Ordering Information

This listing is for the BFT MITTO COOL C4 transmitter. Confirm the supplied battery, any accessories and programming service with your quotation. A receiver, gate motor or automation control board is not automatically included with the remote.

Supply and Programming Support in UAE

Contact BFT Automation UAE for current stock, remote compatibility checking and programming assistance. Supply and support enquiries are welcome from Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. For several users or a property-wide remote replacement, share the required quantity and receiver details so a suitable supply arrangement can be confirmed.

BFT MITTO COOL C4 Frequently Asked Questions

How many buttons does this remote have?

It has 4 programmable buttons and 4 channels for supported receiver commands.

Will it work with every 433 MHz receiver?

No. Frequency and coding compatibility must both match. Check the receiver model before ordering or programming.

What is the operating range?

The nominal range is approximately 50–100 metres under suitable conditions. Actual distance depends on the installation and surroundings.

Can it replace my existing remote?

It can serve as a replacement or additional remote if the installed receiver supports it. Provide the old remote model and receiver details for a compatibility check.

What battery does it use?

It uses one 3V CR2032 coin-cell battery.

Does it need programming before use?

Yes. The transmitter must be registered with a compatible receiver using the correct receiver-specific procedure.

Can I order remotes in bulk?

Yes, contact BFT Automation UAE with your required quantity and receiver details for a bulk quotation and programming requirements.

Order BFT MITTO COOL C4 in UAE

For product availability, pricing and compatibility support, contact BFT Automation UAE. Confirm the installed receiver before purchase so the remote is suitable for the intended gate, barrier or door system.

Call / WhatsApp: +971 52 5223840
Email: sales@bftautomationuae.com